Fluder, the full simulation.
A group of four anaerobic digestion units injecting biomethane into the gas grid, compiling sustainability compliance records by hand ahead of each audit. The case followed on this page, a straw delivery arrived without a weighbridge ticket at unit 3, three weeks before the audit.
A group of four anaerobic digestion units injecting biomethane into the gas grid, compiling sustainability compliance records by hand ahead of each audit.
Every delivery traced, from farm to grid injection.
- Fluder operates four anaerobic digestion plants around Oldenburg, in Lower Saxony. They convert livestock manure and crop residues into biogas, upgraded to biomethane and injected into the gas grid. The group employs fifty-five people and partners with over two hundred farms.
- In Germany, 268 facilities were injecting biomethane into the grid in 2025, reaching a record 12.3 TWh. Above 200 Nm³ per hour, a plant must prove the sustainability of its biomethane under the European Renewable Energy Directive, meeting specific emission reduction thresholds.
- At Fluder, delivery notes, weighbridge tickets, laboratory assays, and injection logs are reconciled by hand ahead of each audit. Offtakers require sustainability documentation for every batch delivered.
- An agent compiles delivery notes and weighbridge slips daily, matching them to source farms. It maintains the mass balance for each plant and calculates greenhouse gas emissions using the values specified in the directive.
- It flags any undocumented delivery and any feedstock outside the approved specification. Prior to the audit, it compiles the evidence pack, plant by plant.
What remains with managers
The quality manager signs off on every sustainability declaration, and the certification body's auditor remains the sole authority on certification. The agent alters no weighbridge data or lab analyses.
- Deliveries traced back to the source farm
- Missing documents flagged before audit
- Audit preparation time
- Non-conformities raised by the auditor
Digester monitoring
Digesters record their temperature and gas production. The agent identifies deviations signalling a drop in production and alerts the plant operator.
The plant operator decides on each ration change.
Farm supply contracts
The agent compares, contract by contract, the volumes committed by each farm against actual deliveries.
The purchasing manager negotiates each contract.
Digestate spreading plans
Digestate returns to the fields as fertiliser. The agent prepares spreading plans and declarations based on analyses and surface areas.
The agronomist validates each plan.
Sales to industrial offtakers
The agent prepares the documentation pack accompanying the delivered biomethane for each buyer.
The commercial director negotiates each sales contract.
a straw delivery arrived without a weighbridge ticket at unit 3, three weeks before the audit
A delivery without a weighbridge ticket before the audit, before and after.
- The delivery
- The lorry unloads, and the delivery note ends up in an in-tray.
- The agent logs the delivery and links it to the farm of origin on the same day.
- First workstream
- Weighing
- The missing weighbridge ticket is only discovered while preparing for the audit.
- The agent flags the missing ticket on the day of delivery.
- First workstream
- The mass balance
- The mass balance for each unit is reconstructed manually, month by month.
- The agent keeps the mass balance up to date every day.
- First workstream
- The audit
- The quality manager spends two weeks gathering evidence.
- The evidence file is ready unit by unit, and the quality manager reviews it before signing.
- First workstream
- The digester
- A drop in production is noticed too late, when gas is already lacking.
- The agent detects the temperature drift and alerts the unit operator.
- Workstream 2
- A farm's contract
- No one compares contracted volumes against actual deliveries.
- The agent flags any farm delivering less than planned.
- Workstream 3
- Log
- It logs each delivery with its delivery note and weighbridge ticket.
- Link
- It links each delivery to the farm of origin and its contract.
- Check the list
- It verifies that each feedstock is on the unit's approved list.
- The procurement manager makes the decision on any unlisted feedstock.
- Maintain the balance
- It maintains the mass balance for each unit, from feedstock intake to injection.
- Calculate
- It calculates emissions using the default values set out in the directive.
- The quality manager verifies each calculation.
- Flag
- It flags every missing document and every weighing discrepancy.
- Prepare the audit
- It compiles the evidence file, unit by unit.
- The quality manager signs the declaration.
- Report
- It prepares a monthly update on deliveries and missing documents.
- Weighbridge
- Weighbridge tickets for each lorry.
- Read only
- Delivery register
- Delivery notes and farms of origin.
- Read and update
- Laboratory
- Feedstock and digestate analyses.
- Read only
- Injection meters
- Biomethane injected into the grid, hour by hour.
- Read only
- Sustainability file
- Evidence compiled for the auditor.
- Preparation, signature by the quality manager
- Managing Director
- Sets the agent's rules with us and chooses the next workstream.
- Quality Manager
- Signs each sustainability declaration and hosts the auditor.
- Procurement Manager
- Negotiates contracts with farms and decides on any unlisted feedstock.
- Unit Operators
- Operate the digesters and log deliveries.
- The FDE
- Leads the engagement and writes the agent rules alongside the team. Accountable for every agent.
- Traceability Agent
- Links each delivery to its farm of origin.
- Mass Balance Agent
- Maintains the mass balance and calculates emissions.
- Audit Agent
- Prepares the evidence file for each unit.
- Control Agent
- Checks a weekly sample of deliveries against original documents and reports any discrepancies to the FDE.
- A delivery is linked to the wrong farm.
- Each link retains the delivery note reference, and the control agent checks a sample of them.
- An emissions calculation is incorrect.
- Calculations use the values from the directive, and the quality manager verifies each one before signing.
- The agent modifies a weighing record.
- It has no write permissions for the weighbridge or laboratory analyses.
- A prohibited feedstock is accepted.
- The agent flags any unlisted feedstock, and the procurement manager decides before the next unloading.
- Farm data is leaked.
- All access is logged, and data remains hosted in Europe.
- We measure the baseline over one month, including unrecorded deliveries, preparation time for the last audit, non-conformities raised by the auditor, and tracked deliveries. The quality manager validates the linking rules with us.
- The agent links deliveries in parallel with the unit operators for two weeks, and we compare its results against theirs.
- The agent maintains the mass balance for the four units, and the quality manager reviews it weekly.
- We compare performance against the baseline and select the next workstream with the Managing Director.
- Deliveries tracked to farm of origin
- Share of deliveries linked on the same day, with their supporting documents.
- Missing documents identified before the audit
- Documents flagged by the agent and obtained before the audit.
- Audit preparation time
- Time reported by the quality manager, compared to the last audit.
- Non-conformities raised by the auditor
- Discrepancies noted in the audit report, compared to the previous audit.